Table of Contents
Advertisement
∫
File name 33s-E-Manual-1008-Publication(1st).doc
Printed Date : 2003/10/8
Attempted to refer to a nonexistent program label (or
r
line number) with
Note that the error can mean
you explicitly (from the keyboard) called a program
label that does not exist; or
the program that you called referred to another
label, which does not exist.
The catalog of programs (
indicates no program labels stored.
SOLVE cannot find the root of the equation using the
current initial guesses (see page D–8). A SOLVE
operation executed in a program does not produce this
error; the same condition causes it instead to skip the
next program line (the line following the instruction
variable).
Warning (displayed momentarily); the magnitude of a
result is too large for the calculator to handle. The
calculator returns ±9.99999999999E499 in the
current display format. (See "Range of Numbers and
Overflow" on page 1–16.) This condition sets flag 6. If
flag 5 is set, overflow has the added effect of halting a
running program and leaving the message in the
display until you press a key.
Indicates the "top" of program memory. The memory
scheme is circular, so is also the "line"
after the last line in program memory.
Attempted to execute variable or
variable without a selected program label. This can
happen only the first time that you use SOLVE or
after the message , or it can happen
if the current label no longer exists.
A running program attempted to select a program
label ( label) while a SOLVE operation was
running.
A running program attempted to solve a program while
a SOLVE operation was running.
A running program attempted to integrate a program
while a SOLVE operation was running.
Page : 386
Size : 13.7 x 21.2 cm
r Ë
t
,
,
, or { }.
¹ u
{ } )
∫
d
Messages
∫
FN
F–3
Advertisement
Table of Contents
