Door Reversal - Hisense HR6VFF177A User's Operation Manual

Important!-Normally we advise you select setting in the middle of Cold and Colder, if you want the
temperature warmer or colder please turn the knob to lower or higher setting accordingly.
Be advised that for maximum efficiency we ask that you set your Freezer settings to suit the ambient
temperature in your area.
.
Important!-High ambient temperatures (e.g. on hot summer days) and a cold setting on the
temperature regulator (position Max) can cause the compressor to run continuously or even
non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to maintain
the low temperature in the appliance.
The side at which the door opens can be changed from the right side (as supplied) to the left side, if
the installation site requires.We recommend 2 people to perform this.
Before you start lean the freezer on its back on a 45 Degree angle. The second person should hold this
into position. In order to gain access to the base, you should rest it on soft foam packaging or similar
material to avoid damaging the cooling pipes at the rear of the refrigerator.
Warning!
When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
1. Remove the cover of
screws, and unscrew the
screw, then remove the
top cover.
2. Remove the decoration of
the top cover, and fix the
decoration on the opposite
side.
3. Unscrew the upper hinge
and remove it
4. Unscrew the upper hinge
pivot and place it on the
opposite side.
5. Remove the door and the
lift upper hinge cover on
the door, and fix it on the
opposite side.

Door Reversal

10