Installation Instruction - Hisense HR6VFF177A User's Operation Manual

Hide thumbs Also See for HR6VFF177A:
Table of Contents

Advertisement

Remove transport packaging
The appliance and the interior fittings are protected for transportation. Pull off the adhesive tape on
the left and right side of the door. You can remove any remnants of adhesive using white spirit.
Remove all adhesive tape and packing pieces from the interior of the appliance.
Before installing, carefully read the instruction in order to avoid a certain number of problems.
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight etc.
Maximum performance and safety are guaranteed by maintaining the correct indoor temperature for
the class of unit concerned, as specified on the rating plate. This application perform well from N to
ST. The Appliance may not work properly if it is left for a longer period at a temperature above or
below the indicated range.
IMPORTANT! -There is a need of good ventilation around the fridge for easy dissipation of heat, high
efficiency of refrigeration and low power consumption. For this purpose, sufficient clear space
should be available around the fridge. It is advisable for there to be 75mm separating the back of the
fridge to the wall, at least 100mm of space at its two sides, height of over 100mm from its top and a
clear space upfront to allow the doors to open 160 Degrees.
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear
section of appliances, as poor air circulation can affect performance. Built-in appliances should be
positioned away from heat sources such as heaters and direct sunlight.
Leveling
The appliance should be level in order to eliminate rocking. To make the appliance level, it should be
upright and both adjusters should be firmly contacted with the floor. You can also adjust the level by
screwing out the appropriate level adjuster at the front (use your fingers or a suitable spanner), but
much care should be taken when moving this appliance since it should be heavy.

Installation Instruction

Climate classification
SN
N
ST
T
Ambient temperature
10~32°C
16~32°C
16~38°C
16~43°C
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents