Parts And Functions; Front Panel - Honeywell Dolphin 6100 User Manual

Parts and Functions

Front Panel

Power/Dock LED
Terminal Wells
The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED
and COMM LED indicator.
Place the Dolphin terminal in any one of the four wells to communicate with a host device,
power the terminal, and charge the installed battery pack. The Net Base completely charges
the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for
the extended 3.7 battery.
Power/DOCK LED
Indicates if power is supplied to the Net Base and if a terminal is docked properly in the terminal
well. Each terminal well has its own dedicated Dock LED.
This color
Red
Green
COMM LED
The COMM LED indicates the status of connection and data transfer between the Dolphin
terminal and the Net Base. Each terminal well has its own dedicated COMM LED.
When the Dolphin terminal is docked:
This color
Green
Green
Note: The COMM LED does not necessarily indicate the Net Base and terminal are connected to a valid Ethernet
link. For more information, see
10 - 2
COMM LED
means...
The Net Base has power but no terminal is docked.
The Net Base has power and the terminal is properly seated in the base.
and status means...
Solid A connection has been established between the Dolphin terminal
and the Net Base.
Flashing Data transfer in progress.
RJ45 Ethernet Ports
Terminal Wells
on page 10-3.