Parking Brake
The parking brake is found on the left of the machine.
Pull the lever backward to activate the brake and
forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release the
parking brake before moving the mower.
Blade Switch
To engage the mower deck, pull the blade switch
knob out. The mower blades are disengaged when
the knob is pressed down fully. Depending on fuel
type, control console may vary.
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine. Depending on fuel
type, control console may vary.
Turn the key clockwise to start the engine.
22
CONTROls
Parking brake
Blade switch
Ignition switch
8065-006
8065-004
8065-058