Safe Handling Of Propane - Husqvarna 966061101 Operator's Manual

Safe Handling of Propane

To avoid personal injury or property damage, use
extreme care in handling propane cylinders. Propane
is extremely flammable and the vapors are explosive.
• Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
• Have propane cylinders filled at an authorized
facility by trained personnel.
• When transporting tanks to be refilled, secure
the tanks upright. Make sure the tanks valves are
closed. Due to residual vapor, handle empty tanks
as carefully as full tanks.
• When having tanks refilled, make sure tanks are
not overfilled. Tanks should not be filled more than
80%.
• Use only propane cylinders approved for this unit.
• Never change cylinders with the engine running.
Allow engine to cool at least two (2) minutes
before exchanging cylinders.
• Never exchange the cylinders indoors.
• Never store the machine or cylinders where there
is an open flame, spark, or pilot light such as on a
water heater or other appliance.
• Check area ordinances for storage of propane
cylinders. Spare cylinders should be stored
outdoors in an upright position in a secure
location.
• Do not store cylinders in low lying or enclosed
areas. Propane gas can pool and linger in poorly
ventilated areas.
• After changing cylinders, check that all cylinder
support brackets are securely fastened and
fittings are tightened.
• If leaks arise in fuel system, engine must not be
started until problem has been resolved.
14
saFeTy
WARNING!
Propane, either liquid or vapor,
is extremely cold. Use protective
gloves when venting, refilling or
exchanging cylinders.
WARNING!
The engine and the exhaust system
become very hot during operation.
There is risk for burns if touched.
Allow engine and exhaust system to
cool at least two (2) minutes before
refueling.