Level Ii Programming - GE AvantaPure Operation Manual

Level II Programming

Level II program parameters are those parameters used to
fine-tune a conditioners operation. These are accessible
by pressing and holding the UP and DOWN buttons until
the display goes blank. Then release the buttons. Calendar
Override is the first Level II parameter displayed. Level II
program parameters include:
269 Conditioner Operation
CALENDAR OVERRIDE
SALT AMOUNT*
CAPACITY K GRAIN
HARDNESS GPG
SELECT LANGUAGE
CLOCK MODE
UNITS OF MEASURE
INJECTOR SELECTION*
BACKWASH 1
SLOW RINSE
FAST RINSE 1
BACKWASH 2
FAST RINSE 2
OPERATION TYPE 268*
SERVICE INTERVAL
CHLORINE GENERATOR
*View only.
Level II parameters will, in almost all cases, be preset to
meet your configuration needs. The predefined system
number will preprogram all of the Level II parameters to
the selected default values.
Type
23