Backlight; White Balance - Samsung SID-370 User Manual

Operating Your Camera
AWC →SET : To f ind the optimal setting for the current luminance environment in this mode,
set the point the camera towards a sheet of white paper and press the
Function Setup Switch. If the environment changes, readjust it.
MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-tune
the White Balance and then press the Function Setup Switch.
WHITE BAL MANUAL SETUP
RED
BLUE
▶END
Press SET to Return
Notes
• W hite Balance may not work properly under the following conditions. In this case
select the AWC mode.
When the color temperature of environment surrounding the subject is out of
1
the control range
When the ambient illumination of the subject is dim.
2
If the camera is directed towards a fluorescent light or is installed in a place
3
where illumination changes dramatically, the White Balance operation may
become unstable.
18
COLOR CCD CAMERA
117
|
||||||| ||||||||||||||||||
93
|
||||| ||||||||||||||||||||
User's Manual (SID-370)

BACKLIGHT

This camera is designed so that it delivers a distinctive subject and background at
The same time, even when the subject is in backlight, unlike conventional cameras,
By adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by moving up or
down direction of Function Setup Switch. so that the arrow indicates 'BACKLIGHT'.
MAIN SETUP
WHITE BAL
BACKLIGHT
MOTION DET
2. Select a desired mode moving left or right direction of Function Setup Switch. depending
on the camera pupose.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC(High Light Compensation) : If there is a high light installed in dark environment
such as an apartment parking garage or gas
station entrance, removing the high light makes
it possible to view car license plates efficiently.
HLC MASKING AREA
<HLC ON>
COLOR CCD CAMERA
ATW
OFF
OFF
<HLC OFF>
19
User's Manual (SID-370)