Manual Operation - Hitachi RAS-30CP1R Installation Manual

MANUAL OPERATION [Cooling
Please use below condition when you want to set the function mode, room temperature and fan
speed by manually.
Room Temperature 16°C above
1
OPERATION MODE SELECTION
Every time you press the button, the mode will change as the below sequence
(Auto) [ (Cool) [
2
ROOM TEMPERATURE SETTING
Up
°C
Down
The cooling operation does not start if the temperature
setting is higher than the current room temperature.
3
FAN SPEED SETTING
Every time you press the button, fan speed will change as the below sequence.
COOLING
}
CIRCULATION
NOTE
(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW
automatically when the preset temperature is reached.
DEHUMIDIFYING
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at
the temperature setting slightly lower than the current room temperature, regardless of the temperature
setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature
becomes lower than the setting temperature.
4
Press the
Operation start with a signal received sound "beep".
Press the
STOP
As the settings are stored in memory in the remote control unit, you
only have to press the
DEHUMIDIFYING
(Dehumidify) [
Recommend Temperature
Dehumidify 16~26°C
Cooling 25~28°C
: AUTO [ HIGH [ MED [ LOW
: (
[ [
: LOW (FIXED)
: ( — )
(START/STOP) button
(START/STOP) button
(Start/Stop) button next time.
Dehumidify Circulation]
COOLING
Outdoor Temperature 22-42°C
(Circulation)
HITACHI
)
[
– 10 –
HITACHI
°C
HITACHI
HITACHI
°C
°C
°C