Hard Disk, Memory & Expansion Cards Installation - Avalue Technology OPC-15W3 Quick Reference Manual

Open Frame 15.6" Series
2.2 Hard Disk, Memory & Expansion Cards Installation
2.2.1 Remove Top Cover
Step 1. Remove 4 screws (red dots) from the heat sink.*
*These 4 screws are different from all others screws in the system. Do not mix these 4 screws with others.
Step 2. Remove 2 screws (green dots) from the DVI connector.
Step 3. Remove 6 screws (red dots) from the top of the chassis.
Step 4. Remove 8 screws (blue dots) from the top of the chassis.
Step 5. Lift and remove the top cover.*
*Remove the top cover carefully if the TV antenna cable is attached to the TV tuner card.
14 Open Frame 15.6" Series Quick Reference Guide