Table of Contents
Advertisement
EPD-4200
3.3 Installation
a. Plug 12V adapter into the EPD-4200 and connect it with a box PC or an SBC via an USB
cable (Type A to Type A). After that, connect the box PC or SBC to a monitor via
HDMI/DP/VGA...etc. and then power on both box PC or SBC and EPD-4200.
b. Refer to the item
1.Driver
to install T1000 device driver.
c. Open EPD-4200 T1000 test tool folder to execute "T1000 Test.exe"
20 EPD-4200 Quick Reference Guide
Advertisement
Table of Contents
