Specifications; Accessories List - Aiwa NSX-BL54 Service Manual

Main unit CX-NBL54/CX-NAJ54
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminal
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
MIC
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads

ACCESSORIES LIST

REF. NO PART NO. KANRI
NO.
1 8A-NFJ-902-010
1 8A-NFJ-913-010
2 8Z-NF8-702-010
2 8Z-NF9-702-010
3 87-006-268-010
3 87-A90-030-010
4 87-043-115-010
5 87-A91-017-010
!
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 µV/m
Loop antenna
Rated: 20 W + 20 W (8 ohms,
T.H.D. 1 %, 1 kHz) <LH>
Reference : 25 W + 25 W (8 ohms,
T.H.D. 10 %, 1 kHz) <LH>
20 W + 20 W (200 Hz - 20kHz, THD
less than 1%, 8 ohms) <U>
0.1 % (10 W, 1 kHz, 8 ohms, DIN
AUDIO)
Rated: 60 W + 60 W (6 ohms,
T.H.D. 1 %, 130 Hz) <LH>
Reference : 75 W + 75 W (6 ohms,
T.H.D. 10 %, 130 Hz) <LH>
60 W + 60 W (50 Hz - 200 Hz, THD
less than 1%, 6 ohms) <U>
0.1 % (30W, 130 Hz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 500 mV
1.0 mV (10 k ohms) <LH>
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz – 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback head
x 1, erase head x 1
DESCRIPTION
IB,LH(ESP)B<LH>
IB,U(ESF)M<U>
RC UNIT,RC-ZAS01<LH>
RC UNIT,ZAS02<U>
ANT,LOOP AM<U>
ANT,LOOP AM-NC C<LH>
FEEDER-ANT,FM
PLUG,CONVERSION JT-0476<LH>

SPECIFICATIONS

Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Power consumption in standby mode
Dimensions of main unit
(W x H x D)
Weight of main unit
Speaker system SX-WNBL53/SX-WNAJ53
Speaker system
Speaker units
Impedance
Sensitvity
Dimensions (W x H x D)
Weight
• Design and specifications are subject to change without notice.
• The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound, Inc.
• Under license from BBE Sound, Inc.
2
Semiconductor laser (λ = 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
120 V/220 – 230 V/240 V AC,
switchable 50/60 Hz <LH>
120 V AC, 60 Hz <U>
130 W <LH>, 110 W <U>
If the power-economizing mode is
ECO OFF: 20 W
If the power-economizing mode is
ECO ON or ECO AUTO: 0.9 W
260 x 326 x 346 mm
(10 1 / x 12 7 / x 13 5 / in.)
4 8 8
9.0 kg <LH>
8.0 kg (17 lbs 10 oz.) <U>
3 way, Built-in subwoofer (magnetic
shielded type)
Subwoofer: 160 mm (6 3 / in.)
8
cone type
Full range: 100 mm (4 in.)cone type
Super tweeter: 20 mm ( 13 / in.)
16
ceramic type
6 ohms/8 ohms
87 dB/W/m
230 x 324 x 282 mm
1 7 1
(9 / x 12 / x 11 / in.)
8 8 8
4.8 kg (10 lbs 9 oz)