Table of Contents
Advertisement
Chapter 6 V850 ZigBee Gateway Development
6.1 Hardware Installation
6.2 Software Installation
6.2.1 IAR Systems Embedded Workbench installation
36
Platform, Installation and Operation
The IAR Embedded Workbench including the C-SPY debugger allows the user to
build and download application programs to the V850 ZigBee
Development Platform. As the communication interface between the PC host
system and the V850 ZigBee
USB interface line is needed. Before you can download and run a program,
relevant software and hardware must be installed properly.
CDROM contents:
•
IAR Embedded Workbench for V850 Kickstart version
•
GUI Software for flash programming
•
IEEE 802.15.4 MAC library
•
Sample Programs
•
Documentation
After unpacking V850 ZigBee
board to your host computer using the provided USB interface cable. When V850
TM
ZigBee
Gateway Development Platform is connected, the USB driver needs to
be installed on the host machine. Please refer to the specific section "6.3 USB
Driver Installation" .
TM
The V850 ZigBee
Gateway Development Platform package comes with the
following software demo packages:
•
IAR Systems Embedded Workbench for V850 including C compiler,
assembler, linker, librarian and IAR C-SPYdebugger / simulator
•
GUI software for flash programming
•
Sample programs
The IAR Systems Embedded Workbench must be installed on your PC. For
detailed installation hints, refer to the corresponding documentation of the IAR
Embedded Workbench: "IAR Systems Embedded Workbench for V850
installation".
To install the IAR Systems Embedded Workbench for V850 including C-SPY
debugger / simulator, select the AUTORUN program in the directory <CD>\IAR
of the CDROM. The setup dialogues will guide you through the installation
process.
User's Manual U19026EE3V0UM00
TM
Gateway Development Platform board is USB, a
TM
Gateway Development Platform, connect the
TM
Gateway
Advertisement
Table of Contents
