Table of Contents
Advertisement
Chapter 7
Figure 7-5
7.3 Sample Debug session using the TK interface
42
Please load the sample workspace located in the "Sample_V850SG2+ZB"
directory.
Opening the V850_UZ Sample Project
The above screen shows the sample project layout including the main system
libraries (LIB group) and source files (SRC group). The CNET group contains the
relevant application source files associated with the TCPIP libraries and the MAC
group contains all the source files associated with the IEEE 802.15.4 library.
Before commencing a TK interface debugging session ensure that the USB driver
has been correctly installed. The V850 ZigBee
Platform uses a monitor program for debugging purposes. The communications
between the starter kit and the IAR C-Spy debugger running on the PC is done
via a standard UART / USB connection. The monitor program is automatically
downloaded to the starter kit during connection therefore the user does not need
to take core of the monitor program itself.
Monitor Resources
The following resources are utilised by the monitor program and cannot be used
by the user program when debugging by the TK interface.
User's Manual U19026EE3V0UM00
IAR Sample Session
TM
Gateway Development
Advertisement
Table of Contents
