Connecting And Synchronizing The Terminal And Workstation - Honeywell Optimus 5100 User Manual

Connecting the USB Charging/Communication Cable
To facilitate USB communication between the Optimus terminal and the host workstation, you may
connect your unit to a host by using either the optional Optimus 5100 USB Communication Cable or
HomeBase. If you use the Communication Cable, insert the cable into the bottom of the terminal lining
up the terminal's I/O connector with the cable unit's connector. Connect the USB cable to the workstation
and the power cable to the power source, if required.
USB
Connector
USB Cable

Connecting and Synchronizing the Terminal and Workstation

To synchronize data between the terminal and the workstation, ActiveSync (version 4.5 or higher) or
Windows Mobile Device Center must be installed and configured for the appropriate communication type
on the host workstation (Windows-based PC) and the Optimus terminal. Optimus terminals ship with
ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just
need to connect the Optimus terminal to the host workstation (via Optimus peripheral) to initiate
communication.
If ActiveSync (4.5 or higher) or Windows Mobile Device Center is not installed on the host workstation,
you can download and install the most current version of the software from the
/go.microsoft.com/fwlink/?LinkId=147001).
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running
Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed
information on ActiveSync and WMDC visit the
When communicating via ActiveSync or Windows Mobile Device Center, your terminal is designed to be
connected to the host workstation with a communication peripheral sold/manufactured by Honeywell, such as
the charge/communication. Use of any peripherals not sold/manufactured by Honeywell may cause damage
not covered by the warranty.
Communication Type
The 5100 supports the following type of communication via ActiveSync through its
page 3-8) on the bottom panel:
7 - 2
Host
Workstation
I/O Connector
DC Power
Jack
Microsoft Windows Phone Web
Power Cable
Microsoft Web site
site.
I/O Connector
(http:/
(see