Auto Set Up - LG BDS580 Owner's Manual

• While operating this recorder, do not detach
HDD. It may cause a serious defect to this
recorder.
• Maximum capacity of HDD is limited to 1TB.
• The HDD capacity displayed on your TV screen
may not exactly same with the capacity printed
on your HDD.
• If is recommended to use external HDD with one
partition.
CAUTION
• HDD partition does not support more than four.
If the partition is divided into four or more, it
does not work.
• HDD partition divided with extended partition
only, can be abnormal.
• During the recording, if you plug off USB
external HDD by force, if can cause a serious
problem on hard disk drive.
• If you separate the external HDD during the
recording, The set does not shut down normally,
It can be harmful to the HDD, Also you can not
enjoy the recordings in the recording list.
NOTE
• A recording features is only supported on first
primary partition and it must be 4KB block NTFS
format.
• 100GB or more of free space is recommended.
• Connection between the Set and an external
hard disk must be connected directly.
If you connect external hard disk and set
with a separate USB HUB, In this case, It is not
supported.
• If you edit or delete contents recorded on an
external HDD from another PC, It can be deleted
but cannot be played in Recordings list.
• External HDD supported USB 2.0
• HDD using a separate external power supply
should be connected to power.
• A recording feature needs system folder that is
named "REC", and it is unable to browse by user.

Auto Set UP

You can reset the recorder to all its factory
settings. Some options cannot be reset (Rating
and Password). The [Factory Set] menu appears
on the screen after the factory settings.
Step 1. Language Setting
1. Use U / u / I / i to select a language for the
on-screen display, and press ENTER( ).
Step 2. Channel Setting
1. Use U / u / I / i to select a country, and press
ENTER ( ).
2. Input the new password using numerical
buttons. Enter it again to verify.
Installation 27
3