Auto Set Up - LG HR550C Owner's Manual

Auto Set UP

You can reset the recorder to all its factory
settings. Some options cannot be reset (Rating
and Password). The [Auto Setup] menu appears
on the screen after the factory settings.
Step 1. Language Setting
1. Use U / u / I / i to select a language for the
on-screen display, and press ENTER ( ).
Step 2. Channel Setting
1. Input the new password using numerical
buttons. Enter it again to verify.
2. Use U / u to select the [Cable] or [Terrestrial]
and press ENTER ( ).
3. Use U / u / I / i to select a country, and press
ENTER ( ).
4. Use U / u to select the cable operator and
press ENTER ( ).
5. While the Start option is selected, and press
ENTER ( ) to begin the channel search.
If you want to search channels in numerical
order, uncheck the box [Automatic
Numbering] by using ENTER ( )
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Channel Setting]
function will be skipped.
6. Press ENTER ( ).
Step 3. Time Setting
1. Use I / i to select an option among
[Manual] or [Auto], and press ENTER ( ).
Auto: Set the programme that broadcasts
a clock signal and the clock will be set
automatically.
Manual: If there is no channel that
broadcasts a clock signal in your area, you
can set the time and date manually. Use
U / u to select each field, and input correct
time and date using I / i . You can use
numerical buttons.
2. Press ENTER ( ) to complete the time
setting.
Step 4. Network Setting
1. Refer to "Wired network connection" on
page 20-21 to complete the [Wired] setup
option, and press ENTER ( ).
Select [No] and press ENTER ( ) to cancel.
2. Refer to "Wireless network connection"
on page 22-24 to complete the [Wireless
Setup] option, and press ENTER ( ).
Select [Cancel] and press ENTER ( ) to
cancel. This recorder can apply only one
network setup between [Wired] and
[Wireless].
If you already set the [Wired] at step 6, you
do not need to set [Wireless] setting.
Installation 27
3