LG BDS580 Owner's Manual page 69

Entering a network user ID and the
password
Depending on your PC's environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The virtual keyboard appears automatically
if the network user ID and the password are
required.
2. Use U / u / I / i to select a character then
press ENTER ( ) to confirm your selection
on the virtual keyboard.
To enter a letter with an accent mark, select
the letter from the extended character set.
Example: Select "D" and then press INFO/
DISPLAY ( ) to display the extended
character set. Use I / i
and then press ENTER ( ).
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
3. When you finish entering the network user
ID and password, select [OK] using U / u /
I / i and press ENTER ( ) to access the
folder. The network user ID and password
will be remembered after accessing the
folder for your convenience. If you do not
want the network user ID and password
to be remembered, press red (R) coloured
button to un-tick the [Remember] check
box before accessing the folder.
to select "D" or "Ď"
Operation 69
4