Oregon Scientific JMR818WF User Manual page 5

Day-of-the-week
Language
Monday Tuesday Wed.
English
German
French
Italian
To change the "seconds" display to the day-of-the-week
display:
1. When the "seconds" are displayed, press CLOCK once.
To change the day-of-the-week display to the "seconds"
display:
1. When the day-of-the-week is displayed, press CLOCK once.
CALENDAR AND ALARM TIME DISPLAY
The calendar and the alarm-time share the same section of the display.
The calendar is displayed in a day-month format.
calendar mode
alarm mode
To change the calendar display to the alarm-time display:
2. When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
2. When the alarm time is displayed, press ALARM once.
HOW TO SET THE CALENDAR CLOCK
MANUALLY
When the unit is outside of the 1500km radius of the radio signal
DCF77 generated from Frankfurt, Germany, the unit may require
manual setting.
JMR818WF-E R1 R OP
Black
Thursday Friday Saturday Sunday
4
4
Note: The RF controlled mechanism overrides manual
settings. If manual settings are made, the clock will
periodically adjust the time to what is indicated by the
radio signal.
To manually set the clock:
1. Press CLOCK and hold for two seconds. The hour digits will
start to flash.
2. Enter the correct month using the [
rapidly increase the value.
3. Press CLOCK to confirm and proceed to set the minutes.
Again, use the [ ] button to select the correct minutes.
4. Press CLOCK to confirm and proceed to enter the current
date and the current month.
5. Next, select a language for the days of the week. To choose a
language press [ ] button.
6. Finally, press CLOCK to proceed to the day-of-the-week.
Proceed in the same manner.
7. When finished, press CLOCK. The time and date are now
set.
TO SET AND ACTIVATE THE ALARM
The calendar display and the alarm display share the same section
of the display.
To set the alarm-time:
1. Press and hold ALARM for two seconds, the alarm time will
flash.
2. Press [ ] to enter a value for the hour digits. To confirm,
press ALARM and proceed to the minute digits.
3. Again, press [ ] to enter a value for the minute digits.
Press ALARM to confirm.
To activate the alarm:
Press [ ON/OFF ] . When the [
display, the alarm is set and will activate at the set time.
To deactivate the alarm, press [
ALARM AND SNOOZE FUNCTION
When the alarm function is active, the unit will alarm at the set
time.
Resulting from the crescendo function, the alarm initially starts
gently and increases in intensity in three stages. Without
interruption, the alarm will activate for (2) two-minutes.
To stop the alarm, press any key. However, if the [ (( SNOOZE )) ]
is pressed, the snooze function will be triggered. The alarm will
stop for eight minutes before activates again.
8/27/04, 6:00 PM
] button. Hold to
] icon is visible on the
ON/OFF ] once.