Connecting An Ipod Or Usb Memory Device To The Usb Port - Denon DCD-2020AE Owner's Manual

Connecting an iPod or USB memory device to the USB port

• You can enjoy music stored on an iPod or USB memory device.
• For operating instructions see "Playback iPod ® "
(vpage 14).
Cables used for connections
To connect an iPod to this unit, use the USB cable supplied with the iPod.
USB memory
device
or
DENON does not guarantee that all USB memory devices will operate or receive power. When using a
portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power,
use the AC adapter.
CD
(vpage 13) or "Playing a USB memory device"
iPod
NOTE
• Connection to a computer is possible via the digital input USB port on the rear panel. Playback is not
possible when connected via the front panel's USB port.
• USB memory devices will not work via a USB hub.
• Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.
• When connecting an iPhone to this unit, keep the iPhone at least 20 cm away from this unit. If the iPhone
is kept closer to this unit and a telephone call is received by the iPhone, noise may be output from this
device.
• If the iPod is connected using an iPod cable (commercially available) that is longer than 2 m, sound may
not be played correctly. In this case, use a genuine iPod cable, or a cable that is shorter than 1 m.
• Files can be read from a USB memory device by connecting the device to this unit. The file reading
time varies according to the amount of data saved on the USB memory device. Several minutes may be
required to read the maximum permissible number of files and folders.
• Always stop a USB memory device or iPod playback before turning this unit's power off.
6