Sony MEX-BT4000P Operating Instructions Manual page 22

22
Operating the Bluetooth
functions
1
Press (
CALL ) •
The call menu appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Press ~ (BACK)*.
The source returns to the Bluetooth
phone.
* For SET PAIRING, REDIAL, VOICE DIAL and
SET BT SIGNL settings, step 3 is not necessary.
The following items can be set:
SET PAIRING (page 22)
PHONEBOOK (page 25, 27)
REDIAL (page 26)
RECENT CALL
(page
26)
VOICE DIAL
(page
28)
DIAL NUMBER
(page
26)
PH BOOK SEL
(Phonebook Select)
(page
25)
RINGTONE*
Selects whether this unit or the
connected cellular phone outputs the
ringtone:
((1
(this unit)''-
((2
(cellular
phone)."
AUTO ANSWER
Sets this unit to answer an incoming call
automatically:
((OFF"-((1
(about
3
seconds)"-
((2
(about
10
seconds)."
DEVICE DEL
(Device Delete) (page
27)
SET BT SIGNL
(Set Bluetooth Signal)
(page
23, 24)
* Depending on the cellular phone, this unit's
ringtone may be output even if set to "2 (cellular
phone)."
The Bluetooth device (cellular phone, audio
device, etc.) and this unit need to be
((paired" before use between each other via
the Bluetooth function.
.
..
.,.
• For details on pairing for a Bluetooth device,
refer to the operating instructions supplied with
the device.
• You can pair up to 9 Bluetooth devices with this
unit.
1
Place the Bluetooth device within 1 m
(3ft) of this unit.
2
Press
(CALL)
and rotate the control
dial until "SET PAIRING" appears,
then press it.
The unit enters pairing standby mode.
~---------------------~~~
-01-
'---------~lj
Flashing
3
Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected.
This unit is displayed as ((Sony
Automotive" on the device to be
connected.
4
If passkey* input is required in the
display of the device to be connected,
input "0000."