Husqvarna AUTOMOWER 220 AC Operator's Manual page 58

To:
• Activate: Move the cursor to Time lock and
press YES. Now move the cursor to Number of
days and press YES. Specify how many days
you would like Automower to mow before it
requests the PIN code. Finish by pressing YES.
When the selected number of days has elapsed,
Automower completes mowing and charges the
battery. The message Enter PIN code is then
shown on the display. You then enter your code
and press YES.
In addition, Automower will now request the
PIN-code each time the main switch is switched
to ON.
• Deactivate: Move the cursor to Time lock and
press YES. Now move the cursor to OFF and
press YES.
• Stop protection (4-1-3)
This function means that the first number of the
PIN code must be specified within 10 seconds
after the STOP button has been pressed. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Stop protection function. It is
recommended that this function is used.
To:
• Activate: Move the cursor to Stop protection and
press YES. Select ON to activate and press
YES. Then specify for how long the alarm
should sound, by answer the question Duration
of alarm?.
• Deactivate: Move the cursor to Stop protection
and press YES. Select OFF to deactivate and
press YES. When you select OFF, the alarm
function is also deactivated.
6. MENU FUNCTIONS
PIN code
Time lock
Stop protection
Settings lock
4-1-3
_ _ _min
ON
OFF
English - 59