Check Filters; Change Main Menu; Save Extras - Miele HG05 Operating Instructions Manual

Check filters

You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The reminder to check the filters is set
at the factory to appear after every 50
programme cycles.
 Select the interval you want and
confirm with
OK

Change main menu

You can change the order of the
programmes in the programme
selection menu and also enter your
favourite programmes into the first four
programme places.
 Select the programmes you want to
place in the first to fourth position of
the programme selection menu.
 Confirm each position with
The programmes you have selected will
then appear together in the display.
 If you are happy with the order they
are shown in confirm with
 To change the order they are shown
in select
Change
Enter the settings again.
.
.
OK
.
OK
.

Save extras

Additional programme options can be
added to some programmes, e.g.
(see "Programme options, Extras").
You can use the
Save extras
save settings you have chosen for a
particular programme so that they are
automatically selected when you run
the programme in the future.
The dishwasher is delivered with this
function deactivated.
 Select the setting you want and
confirm with
OK
Settings menu
Short
option to
.
89