Important Safety Instructions - HAMPTON BAY SKU 759-133 Instruction Manual

Thank you for purchasing this Hampton Bay interior light fixture. This product has
been manufactured with the highest standards of safety and quality.
FEATURES:
1. Fixture heads are multi-directional.
2. Uses 120V, GU10 shielded 50W bulbs (Included).
3. Designed for mounting to ceilings or walls.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team
at 1-877-527-0313 or visit www.homedepot.com. Please reference SKU 759-133,
UPC 008938263191.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: Make sure power is turned off at the electrical panel box before beginning
your installation. Turning the power off at the wall switch is not sufficient to prevent
electrical shock.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
1. Read all instructions prior to beginning the installation process.
2.
Do not install this lighting system in a wet location.
3. Lighted lamp is HOT!
4. CAUTION - HOT SURFACE. Keep away from curtains and other combustible
materials.
5. Do not touch bulb, lens, guard or enclosure at any time. Use a soft cloth. Oil from
skin may damage lamp.
6. CAUTION-To reduce the risk of fire, use only 50W Max type GU10 shielded bulbs.
7. All electrical connections must be in accordance with local codes and the National
Electrical Code. If you are unfamiliar with methods of installing electrical wiring,
secure the services of a qualified licensed electrician.
8. These fixtures are intended to be mounted to a 4"square x 2-1/8"deep metal octagon
outlet box. The box must be directly supported by the building structure.
9. Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing the appropriate fuse at the fuse box. Turning the power off
using the light switch is not sufficient to prevent electrical shock.
SAVE THESE INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION (not included):
Ladder Safety Gloves
Goggles
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
x
4 GU10 Halogen
50 Watt Bulb(s) (D)
Flathead Phillips
Screwdriver Screwdriver
x1 Re-lamping tool (E)
2
Electrical Wire
Tape Cutters
x1 Hardware Packet (F)