Husqvarna 13 H Operator's Manual page 15

Cold engine:
4. Push the throttle control to position 3 (choke
position). In this position the engine receives a
richer mixture so that the engine starts more
easily.
Warm engine:
5. Set the throttle control midway between position
1 and 2.
6. Turn the ignition key to start position.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
DRIVING
1
1
2
2
STOP START
3
3
13
English –