Setting temperature
›
Turn the control dial
» Fig. 89
A
›
Turn the control dial
to the left to decrease the temperature.
A
Controlling blower
›
Turn the blower switch
» Fig. 89
B
the blower on.
›
Turn the blower switch
into position 0 to switch the blower off.
B
›
Press the button
to close the fresh air supply
4
Regulating the air distribution
›
The direction of the inlet air flow is controlled with air distribution regulator
» Fig. 89 » page
80.
C
Switching the cooling system on and off
›
Press the button
» Fig. 89
AC
1
nates.
›
When you again press the button
off. The warning light in the button goes out.
Rear window heater
›
Press the button
» Fig.
89. Further information
2
Auxiliary heating (parking heating)
›
Press the button
» Fig. 89
to directly switch on/off the auxiliary heating
3
(auxiliary heating and ventilation). Further information
Note
The whole heat output will be needed to defrost the windscreen and side win-
■
dows. No warm air will be fed to the footwell. This can lead to restriction of the
heating comfort.
The warning light
lights after activation, even if not all of the conditions for
AC
■
the function of the cooling system have been met
mation. By lighting up of the warning light in the button, the operational readi-
ness of the cooling system is signalled.
to the right to increase the temperature.
into one of the positions, 1 to 4, to switch
» Fig.
89.
and the warning light in the button illumi-
, the air conditioning system is switched
AC
» page
47.
» page
87.
» page
82, Introductory infor-
Ð
Heating and air conditioning system
83