Brake Pedal; Throttle Pedal - Polaris RANGER RZR Owner's Manual

FEATURES AND CONTROLS

Brake Pedal

Depress the brake pedal to
slow or stop the vehicle.
Apply the brakes while start-
ing the engine.

Throttle Pedal

Brake
Push the pedal down to
Pedal
increase engine speed. Spring
pressure returns the pedal to
Throttle
the rest position when
Pedal
released. Always check that
the throttle pedal returns nor-
mally before starting the engine. Make sure there's adequate throttle
pedal freeplay. See page 98 for throttle pedal adjustment procedures.
This vehicle is equipped with a throttle release switch, which is
designed to reduce the risk of a frozen or stuck throttle. If the throttle
cable should stick in an open position when the operator releases the
throttle pedal, engine speed will be limited, and power to the rear wheels
will be reduced.
Rollover Protective Structure (ROPS)
The Rollover Protective Struc-
ROPS Label
ture (ROPS) on this vehicle
meets OSHA 1928.53 rollover
performance requirements.
Always have your authorized
POLARIS dealer thoroughly
inspect the ROPS if it ever
becomes damaged in any way.
No device can assure occupant
protection in the event of a roll-
over. Always follow all safe
operating practices outlined in
this manual to avoid vehicle
rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
39