Sony DKR-700 Instructions For Use Manual page 11

Power supply and video input/output connectors (rear panel)
SCSI
ID
VIDEO S-VIDEO
1 VIDEO INPUT connector (BNC-type)
Connect to the video output connector of a video
camera, VCR, etc.
For the electrical specification of this connector, see page
49(E).
2 S-VIDEO INPUT connector (mini-DIN 4-pin)
Connect to the S video output connector of a video
camera, VCR, etc.
For the electrical specification of this connector, see page
49(E).
1 VIDEO INPUT connector
2 S-VIDEO INPUT connector
3 RGB/SYNC INPUT connectors
REMOTE
FS2
EX-CTL
RS-232C FS1
FLASH
INPUT ...
R G B SYNC
OUTPUT
Ú
7 RGB/SYNC OUTPUT connectors
8 S-VIDEO OUTPUT connector
9 VIDEO OUTPUT connector
220V 230V 240V
AC IN
⁄
5 1 (equipotential) terminal
(DKR-700P only)
6 ⁄ AC IN connector
3 RGB/SYNC INPUT connectors (BNC-type)
Connect to the RGB and SYNC output connectors of a
video camera, etc.
For the electrical specification of these connectors, see page
49(E).
4 Voltage 220V/230V/240V selector (DKR-700P
only)
Set the position which meets voltage in the mains line
prior to the operation of the unit.
Otherwise the unit may be damaged.
5 1 (equipotential) terminal (DKR-700P only)
Connect to the system ground as required.
4 Voltage 220V/230V/240V
selector (DKR-700P only)
Illustration: DKR-700P
11(E)