Table of Contents
Advertisement
Wireless Information
The settings configured in Wireless Setup can be confirmed.
a
Press QUICK to open the Quick Menu.
b
B
b
Press
or
to select Wireless Information and
press OK.
Quick Menu
Picture Mode
Picture Size
3D Settings
Personal Mode
More Information
Channel Options
Sleep Timer
REGZA-LINK Device Control
Speakers
Headphone Level
Wireless Information
Recording Information
c
When the Network Type is Wireless, a Wireless
Information window will appear.
NOTE: Press the RED button to scan for all APs.
Item
Status
Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the TV is
not connected with the AP.
Signal
Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed
Link with AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel
Channel in use (1-165)
Network Name
SSID set
Authentication Authentication set
Encryption
Encryption set
Security Key
Security Key set
AP MAC
The AP's MAC address is displayed when
Address
the TV is connected with the AP.
TV MAC
The MAC address of the TV is displayed.
Address
DHCP
Enabled is displayed when using DHCP.
Disabled is displayed when not using
DHCP.
IP Address
The TV's IP address
Subnet Mask
Value of the Subnet Mask
Default
Address of the Default GATEWAY
Gateway
DNS
Address of the DNS
AutoView
Super Live
00:00
TV Speakers
50
Description
NOTE: Even if an AP for IEEE 802.11n is used when Encryption
is set to WEP or TKIP, the Speed value might be low. It is
recommended that Encryption be changed to AES (see
"Manual Setup" on page 52).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE 802.11n on
5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and video
streaming.
• Content playback may be interrupted by various
surrounding interference.
Advanced Network Setup
NOTE:
• When the DHCP function of the router connected with this
TV is On, you can set Auto Setup to On or Off.
(This should usually be set to On.)
• When the DHCP function of the router is Off, set Auto Setup
to Off, and set the IP Address manually.
IP Address Setup
Auto Setup:
a
In the Preferences menu, press
Network Setup and press OK.
b
B
b
Press
or
to select Advanced Network Setup
and press OK.
Network Setup
Network Type
Wireless Setup
Advanced Network Setup
Network Connection Test
c
B
b
Press
or
to select IP Address Setup and press
OK.
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
53
CONTROLS AND FEATURES
B
b
or
to select
Wired
Wired
Advertisement
Table of Contents
