CONTROLS AND FEATURES
Common Interface
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional Access
Module) and card. These are purchased from a service provider
and allow additional subscription broadcasts to be viewed. For
information, see a service provider.
a
Insert the CAM and card into the Common Interface
Slot, following the instructions provided with the CAM.
A box will appear on screen to confirm that the CAM
has been inserted.
b
In the DTV Settings menu press
Common Interface and press
c
Details of the CAM should now be available.
B
b
or
to select
Q
.
38
Software Upgrade and
Licenses
Auto Upgrade
When Auto Upgrade is set to On (default setting), the
television will automatically upgrade while in standby if new
software is available.
a
From the SETUP menu press
Software Upgrade and press
b
b
Press
to select Auto Upgrade.
c
C
c
Use
or
to select On or Off.
Searching for New Software
If preferred, software upgrades can be searched for manually
using Search for New Software.
a
In the Software Upgrade menu press
select Search for New Software.
b
Q
Press
. The television will automatically start
searching for a software upgrade, the progress bar will
move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found, the television will automatically
start downloading. If not, a screen will appear stating
that an upgrade is unavailable.
Software Licenses
The licenses for the software used in this television are available
for viewing.
a
In the SETUP menu, press
Licences and press
A screen will appear displaying all the licensing
information required for the television's software.
B
b
or
to select
Q
.
B
b
or
B
b
or
to select Software
Q
.
to