Rodgers Masterpiece Owner's Manual page 35

Audio Control
Normally you do not need to make any changes to these audio menus.
Menu item
Master Volume
Aux Inputs
Rotate
the
Select
Knob
Line Out
Value Explanation
Change the volume of the entire organ. Caution: this value is set by your Rodgers
technician. Changing this value to a higher number may result in distortion. Note: if
Off, -31.25 +6.25
the console has controls engraved MAIN OFF, ANT ON, ALT AUDIO A, or ALT AUDIO
B and they are active (illuminated), the Master Volume setting may change per
active control.
Off, -31.25
Main Volume
+6.25
Main Balance -10 +10
Off, -31.25
Ant Volume
+6.25
Ant Balance -10 +10
Treble -14 +14
Bass -14 +14
Off, -31.25
Amb Lvl
+6.25
Gain Boost 0 +18.5
Yes,
SW
No
Yes,
GT
No
Yes,
CH
No
Yes,
SO
No
Yes,
Send
ASN
No
to
Yes,
ANT
No
Yes,
AMB
No
Yes,
RVB
No
Gain
0 +18.5
Boost
Stereo,
Mode
Mono
Changes the main volume of the device connected to the Aux Inputs
of the console. Caution: this value is set by your Rodgers technician.
Changing this value to a higher number may result in distortion.
Determines the stereo balance. -10 is extremely left, 0 is center, +10
is extremely right.
If Antiphonal speakers are installed, this changes the antiphonal
volume of the device connected to the Aux Inputs of the console.
Caution: this value is set by your Rodgers technician. Changing this
value to a higher number may result in distortion.
Determines the stereo balance. -10 is extremely left, 0 is center, +10
is extremely right.
The treble EQ of the device connected to the Aux Inputs of the
console.
The treble EQ of the device connected to the Aux Inputs of the
console.
Changes the Ambience Level (sensitivity to the organ's Room
Modeling settings) of the device connected to the Aux Inputs of the
console.
Changes the Gain Boost of the device connected to the Aux Inputs of
the console. Caution: this value is set by your Rodgers technician.
Changing this value to a higher number may result in distortion.
Sends the audio of the Aux In device to the Swell speakers.*
Sends the audio of the Aux In device to the Great speakers.*
Sends the audio of the Aux In device to the Choir speakers.*
Sends the audio of the Aux In device to the Solo speakers, if installed.*
Sends the audio of the Aux In device to the Assignable speakers, if installed.*
Sends the audio of the Aux In device to the Antiphonal speakers, if installed.*
Sends the audio of the Aux In device to the Ambient speakers, if installed.*
Sends the audio of the Aux In device to the Room Modeling parameter.*
* Note: if the console has controls engraved MAIN OFF, ANT ON, ALT AUDIO A,
or ALT AUDIO B and they are active (illuminated), this setting may change per
active control.
Affects the Line Out L/R audio signal
Affects the Line Out L/R audio signal
35