Rear Panel - Hyundai H-LCD3202 Instruction Manual

Rear panel

Rear panel terminals and controls
Items
1 HDMI 1, 2
2 VGA
3 PC audio in
4 S-Video
Component video
5
input
Composite video in-
6
put
7 L/R in
8 SCART
9 RF antenna
10 AC input
Notes:
Ensure that the power to the LCD TV and other connected devices is off before you make any connec-
tions.
When connect, plug directly and slightly to the interface, otherwise you will damage the stitch.
S-VIDEO and AV cannot be used at same time for they share of one signal channel.
Check and make sure that all AV cables are connected with the corresponding ports correctly.
Connect one end of the HDMI cable with HDMI output port, connect the other
end of the HDMI cable with the HDMI port on the TV, and tighten the bolts
clockwise on the each end of HDMI cable.
Connect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
Connect it to the audio output terminal of PC.
The output S-Video terminal of DVD can be connected with the S-Video input
port of the TV through S-Video cable.
It's convenient to receive the component video signal of high definition from
DVD player. The output Component (YPbPr) terminal of DVD can be con-
nected with the Component (YPbPr) input port of the TV through AV cable.
Capable of receiving PAL, NTSC, SECAM color systems; Very convenient to
watch VCR (video cassette recorder), Pickup Camera, other Disc's programs.
The AV input of the TV can be connected with the output port of other AV
equipment through AV cable.
Connect them to audio output terminal of DVD (with VIDEO/S-VIDEO).
Connect them to the corresponding terminal of DVD.
The RF output terminal can be connected with the RF input port of the TV.
Connect the AC power cable with 100-240V AC power supply. Connect the
other end of the AC power cable with the AC power port on the TV.
Connection description
7