Shark S3901W Owner's Manual page 19

fig.29
CARE OF YOUR MICRO-FIBER
CLEANING PAD
1 We recommend washing your
micro-fiber cleaning pads separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Don't use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
(fig. 28)
2
If there are loose threads on the
micro-fiber cleaning pad carefully
cut the thread with scissors. Do not
pull on them or cut at the base.
(fig. 29)
IMPORTANT: The micro-fiber
cleaning pad may be very hot
from the steam. Use caution when
removing. Let the unit cool for 2-3
minutes before removing.
fig.28
Cleaning Tip: To prevent clogging,
it is recommended that you
periodically clean the Direct
Steam Nozzle and the extension
hose stem with the cleaning tool
provided or a paper clip.
fig.30
CLEANING THE NOZZLE
1 Your Handheld Steamer should not
normally require cleaning, however,
should you notice a decrease in the
steam output, it may be necessary
to remove mineral deposits built up
around the nozzles.
2 Unplug the cleaner from the
electrical outlet.
3
Use the provided nozzle cleaner or a
small diameter stiff metal wire, such
as a straightened metal paperclip,
and carefully insert the end of the
wire into the nozzle orifice. See
illustration above. (fig. 30)
4 Move the wire back and forth several
times to remove any deposits.
5 Plug in the appliance to the power
outlet and test steam output.
www.sharkclean.com
English
15