Shark S3901W Owner's Manual page 17

Using Your Handheld Steamer
with Flat Scrubber Tool
Cleaning Tip: The Flat Scrubber Tool is designed for cleaning a variety of surfaces
and is exceptional on those that are large and flat including counter tops, table
tops, walls mirrors, windows, stairs, shelves and other similar surfaces. Super
absorbent micro-fiber loosens, lifts, and locks in dirt and grime while sanitizing
at the same time.
fig. 21
1
To attach the All-Purpose Scrubber
pad, place the pad exterior side down
on a flat surface (lavender tab indicates
bottom of the pad). Insert the
top of the Flat Scrubber Tool into the
top portion of the pad and then pull
each side over the back edges.
2
Press the Flat Scrubber Tool onto the
Accessory hose until it clicks into place
(fig. 21)
3 Press and hold the steam trigger
to create steam. While the steam
trigger button is pressed and held
down, the ON/STANDBY will be
solid blue. When released, the ON/
STANDBY will return to flashing blue.
(fig. 22).
fig. 22
4
To remove the Flat Scrubber Tool,
press and hold down the release
button. Then slide the Flat Scrubber
off of the hose. (fig. 23)
CAUTION: Do not press steam
trigger while attaching or removing
the Flat Scrubber Tool.
CAUTION: Do not use the Flat
.
Scrubber Tool without All-purpose
Scrubber Pad attached.
fig. 23
www.sharkclean.com
English
13