When Connecting The External Video Component And The Display; When Connecting With A Rear View Camera - Pioneer AVH-X8550BT Owner's Manual

Connection

When connecting the external video component and the display

Audio inputs
(REAR AUDIO INPUT R)
Audio inputs
(REAR AUDIO INPUT L)
10 cm
RCA connector
This product
Rear audio output
(REAR AUDIO OUT)
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
Refer to Setting AV input on page 41.
This product's rear video output and rear audio
output are for connection of a display to enable
passengers in the rear seats to watch the DVD,
etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
External video component
(sold separately)
To video
output
To audio
outputs
RCA cables
Video input
(sold separately)
(REAR VIDEO INPUT)
Rear monitor output
(REAR VIDEO OUTPUT)
Mini pin plug cable
(sold separately) To video
input
To audio
inputs
Display with RCA input
jacks (sold separately)
Connection
When connecting with a rear
view camera
If you switch the shift lever to REVERSE (R), the
display on this unit will automatically switch to
the rear view image. You need to set the
Camera Polarity properly in the system unit to
use. For details on settings, refer to Setting the
rear view camera (back up camera) on page 43.
You can also switch to the rear view image by
pressing the touch panel key. For details, refer to
Using the rear view on page 9.
WARNING
USE INPUT ONLY FOR REVERSE OR MIR-
ROR IMAGE REAR VIEW CAMERA. OTHER
USE MAY RESULT IN INJURY OR DAM-
AGE.
CAUTION
! You must use a camera which outputs
mirror reversed images.
! The screen image may appear reversed.
! The rear view camera function is to be used
as an aid to keep an eye on trailers, or while
backing up. Do not use for entertainment
purposes.
! Objects in the rear view may appear closer or
more distant than they actually are.
Rear view camera input (R.C IN)
This product
RCA cable
(sold separately)
To video output
Rear view camera
Violet/white
(sold separately)
Of the two lead wires
connected to the back lamp,
connect the one in which the
voltage changes when the
gear shift is in the REVERSE
(R) position. This connection
enables the unit to
sense whether the car is
moving forwards or
backwards.
En
Section
23
55