Bar And Chain Combinations - Husqvarna 346XP 351 Operator's Manual

Bar and chain combinations

The following combinations are CE approved.
Bar
Length, Pitch,
inches inches
13 0,325
15 0,325
16 0,325
18 0,325
13 0,325
15 0,325
16 0,325
18 0,325
20 0,325
Type Inch Inch/mm
H30 0,325" 0,050"/1,3
H25 0,325" 0,058"/1,5
EC-declaration of conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws
Husqvarna 346XP, 351, 346XP E-tech and 351 E-tech from 2002's serial numbers and onwards (the year is clearly stated in
plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, 754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificates for EC type examination
in accordance with annex VI, have the numbers: 404/98/578 - 346XP, 404/98/573 - 351, 404/00/743 – 346XP E-tech,
404/00/744 – 351 E-tech.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, 754 50 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/002 - 346XP, 01/161/004 - 351, 01/161/003 - 346XP E-tech, 01/161/004 - 351 E-tech.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
TECHNICAL DATA
Chain
Max.
tip radius
10T Husqvarna H30
10T Husqvarna H30
10T Husqvarna H30
10T Husqvarna H30
10T Husqvarna H25
10T Husqvarna H25
10T Husqvarna H25
10T Husqvarna H25
12T Husqvarna H25
1
5
Inch/mm
3/16" /4,8
3/16" /4,8
Degree Degree Degree
85° 30°
85° 30°
(Applies to Europe only)
Inch/mm
10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
L
Inch/cm: dl
20"/50:78
35
English –