GE Electronic Icemaker Technical Service Manual page 12

9. The ability of the control to fill up to 3 times can compensate for ___________?
A. Multiple ejections
B. Service diagnostics
C. Low water pressure
D. Extremely cold freezer
10. When the icemaker is first connected to power and if thermistor temperature is 50° F or
higher, the control will perform a _________________ before entering the freeze cycle.
A. Harvest fix
B. Series of fluctuations
C. Power on test
D. Fault test
11. During icemaker operation, the control continuously monitors the thermistor's __________?
A. Resistance
B. Temperature
C. Mode
D. Diagnostics
12. If the thermistor is open or shorted, the icemaker will enter a ______________?
A. Harvest mode
B. Period of inactivity
C. Fault mode
D. Third water fill
13. The diagnostic service mode is entered by pushing the feeler arm from the "out" position to
the "in" position and back _______ times during the first 15 seconds after applying power to
the unit.
A. 2
B. 3
C. 4
D. 5
10