JVC UX-H300 Service Manual page 10

3.1.3 Removing the CD mechanism assembly
(See Fig.9, 10)
• Prior to performing the following procedure, remove the front
panel assembly and the main board.
(1) Release the four bands setting the wire.
(2) Disconnect the wire from the connector on the CD door
switch and from CN601,
mechanism board respectively.
(3) Remove the three screws G attaching the CD mechanism
assembly.
(4) Release the joint d to remove the CD mechanism assem-
bly from the front panel assembly.
1-10 (No.MB297)
CN603 and CN604 on the CD
CD door switch
Front panel assembly
G
Band
G
Band
G
CD mechanism board
CN603
Fig.9
Joint d
Joint d
Front panel assembly
Fig.10
CD mechanism assembly
CN601
CN604
Band
CD mechanism assembly