Memory Position Recall - Dodge Durango 2012 Owner's Manual

10. Insert the ignition key, and turn the ignition switch to
the ON/RUN position.
11. Select Remote Linked to Memory in the Electronic
Vehicle Information Center (EVIC) and enter Yes . Refer
to "Electronic Vehicle Information Center (EVIC)/
Customer-Programmable Features" in "Understanding
Your Instrument Panel" for further information.
12. Repeat the above steps to set the next memory
position, using the other numbered memory button, or to
link another RKE transmitter to memory.

Memory Position Recall

NOTE: The vehicle must be in PARK to recall memory
positions. If a recall is attempted when the vehicle is not
in PARK, a message will be displayed in the Electronic
Vehicle Information Center (EVIC).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195
To recall the memory settings for driver one, press
MEMORY button number 1 on the driver's door, or the
UNLOCK button on the RKE transmitter linked to
memory position 1.
To recall the memory setting for driver two, press
MEMORY button number 2 on the driver's door, or the
UNLOCK button on the RKE transmitter linked to
memory position 2.
A recall can be cancelled by pressing any of the
MEMORY buttons on the drivers door during a recall (S,
1, or 2). When a recall is cancelled, the driver's seat,
driver's mirror and the pedals stop moving. A delay of
one second will occur before another recall can be
selected.
3