Work Pro PA 60/2 User Manual

Work Pro PA 60/2 User Manual

Two zone mixer amplifier
Hide thumbs Also See for PA 60/2:

Advertisement

Available languages

Available languages

Equipson, S.A.
www.equipson.es
PA 60/2
support@equipson.es
User Manual / Instrucciones de Usuario

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA 60/2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Work Pro PA 60/2

  • Page 1 Equipson, S.A. www.equipson.es PA 60/2 support@equipson.es User Manual / Instrucciones de Usuario...
  • Page 2: General Installation

    WARNING:THIS APPLIANCE MUST BE EARTHED ESPECIFICACIONES TECNICAS Tipo Amplificador mezclador de dos zonas RISK OF ELECTRIC SHOCK Modelo PA 60/2 DO NOT OPEN Alimentación AC 115V / 230V , 50 / 60Hz ± 10% Conmutable Alimentación Bateria DC 24V (10% desviación max.) Potencia de Salida Típica...
  • Page 3: Front Panel

    LINEA 100V Estos altavoces son los más comunes en Europa para la distribución de megafonia. Cuando el amplificador FRONT PANEL Two Zone Mixer Amplifier tiene toda la salida, en los terminales tendrá 100V RMS. Use unicamente altavoces de 100V para este uso.
  • Page 4 TEL PRE Sirena ON/OFF Encendiendo el pulsador de la sirena , cortocircuitando los pines del conector JACK del MIC1, activará la función sirena (Ding-Dong precediendo una llamada). El volumen por defecto de la sirena viene configurado de origen y es MUTE el adecuado para muchas aplicaciones.
  • Page 5 Conexiones de red El transformador de alimentación ha sido diseñado para su uso a 115V o 230V, seleccionable con el conmutador situado en el panel trasero. Conexión de la batería de 24V DC Cuando use baterías externas, conecte a tierra el amplificador mediante el terminal. La estabilidad del sistema se incrementa con esta conexión.
  • Page 6 Mains Connection The supply transformer has been designed for use on either 115Vac or 230 Vac, selected by slide switch on rear panel. The amplifier is factory set at 230 Vac mains voltage. Battery Connection (24Vdc) When using external batteries, earth the amplifier via the screw terminal because of the high voltages present.
  • Page 7 Chime on/off TEL PRE Switching on the manual chime on/off on the rear panel and short the pin4 and pin5 od FIN socket´ or short the sleeve and ring of phone plug-MIC1 will activate the chime function (”Ding-Dong” attention signal preceding a call). The default volume of the chime is pre-set at the factory and is MUTE adequate for most applications.
  • Page 8 100V Line Amplificador Mezclador de 2 Zonas PANEL FRONTAL These loudspeakers are mosat commonly used in Europe for PA distribuiton. When the amplifer is at full output 100V RMS will be present at the output terminals. Only use 100V line loudspeakers with this output.
  • Page 9: Instrucciones Generales

    Technical Specifications ATENCION. ESTE PRODUCTO DEBE SER CONECTADO A TIERRA Type TWO ZONE Mixer Amplifier Model PA 60/2 Supply Mains Voltage AC 115V / 230V , 50 / 60Hz ± 10% Switchable Battery Voltage DC 24V (MAX 10% diviation) Output power...

Table of Contents