Chapter 4. Additional Information; Multi-System Operation; Battery Life Information; Warranty Information - X2 Digital Wireless Systems XDS95 User Manual

Additional Information

Multi-system Operation

Up to five systems can operate simultaneously. In situations where it is necessary to have
more than one person wireless, each transmitter and receiver combination must be set to the
same channel. Set the first system to transmit and receive on channel "one", the second sys-
tem to transmit and receive on channel "two"... and so on.
DigiScan™ Special Receiver Power Up Mode
While holding down the channel select button on the receiver, push the on/off button and
release. Continue to hold the channel select button until the LEDs are all solid red. Then
release the channel select button. The unit will now do a RF scan on all 5 frequencies.
While in this mode the receiver will continue to scan and report. If the channel has no RF
signal then a blue LED will light for the corrosponding channel number. If there is currently
RF in the channel the LED will be red. Blue LEDs mean channel is clear red means the
channel is not clear. To enter regular operating mode push and hold down the on/off button
until the unit enters the normal mode.
Optimizing Your Wireless Performance
Place the receiver on or near the desired amplification system, pedalboard or with your
effects pedals. FOR BEST RESULTS, PLACE RECEIVER HIGH ABOVE ANY OBSTRUC-
TIONS, as the system works best when transmitter and receiver are in line of sight.

Battery Life Information

Fresh Alkaline batteries should last about ~12 hours in the XDT1 and ~8 hours in the
XDR1, NiCad rechargeable batteries will only last about 4.5 hours. Standard batteries are
not recommended. THE BATTERY HOUR DISPLAY WILL ONLY BE ACCURATE FOR
ALKALINE BATTERIES. The battery life is calculated inside the each component and dis-
played in 1 hour increments. Upon power up the battery info will take about one minute to
stabilize, the battery gauge is then accurate within + or - 30 min. You may use batteries
until they are completely drained without affecting the performance of the unit in any way.

Warranty Information

X2 will repair or replace any defective system within the first two years free of charge. X2 will
cover 2-day return shipping costs in the continental United States. This warranty is trans-
ferrable, but does not cover abused systems. Terms and conditions subject to change with-
out notice. Please retain a copy of your dated sales receipt for proof of warranty status
should repairs become necessary.
Warning:
Changes or modifications not expressly approved in writing by X2 Corporation may void the
users authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5