Specifications - X2 Digital Wireless Systems XDS95 User Manual

Specifications

Overall System Specifications
Transmission Format:
Frequency Response:
Audio Dynamic Range:
Distortion:
RF Carrier Frequency:
Selectable Frequencies:
RF Output Power:
Audio Output Level:
Polarity:
Transmission Range:
FCC Approval:
XDT1 Transmitter Specifications
A/D Conversion:
Input Impedance:
Connectors:
Controls:
LED Display:
Dimensions:
Battery Life:
Weight:
XDR1 Receiver Specifications
D/A Conversion:
Output:
Connectors:
LED Display:
Controls:
Dimensions:
Power Requirements:
Battery Life:
Weight:
7
X2 proprietary digital audio transmission
20 Hz - 12 kHz
>117 dB
0.03% THD
902 MHz to 928 MHz, FSK
Five
10mw
Unity gain with transmitter input
Positive voltage at input yields positive voltage at output
>150 feet line-of-sight (may vary due to local conditions)
Part 15 approved, no user-license required
24-bit Delta Sigma, 128 times over sampling
1.3 M
1/8" Unbalanced locking connector
Power On/Off, Channel Select
Five segment - Power On, Channel, Battery Life, Audio
Level Meter
2.4" W x .66" D x 4" H
Switching power supply, ~12 Hours (9v alkaline)
.25 lbs (with 9v battery installed)
24-bit Delta Sigma, 128 times over sampling
2.12V RMS (Unbalanced: 1.8K )
1/4" Unbalanced stereo output, tip= instrument voicing,
sleeve= full bandwidth
Five segment - Power On, Data Link, Channel, Battery
Life, Audio Level Meter, RF Strength
Power On/Off, Channel/Mode Select
3.078" W x 1.17" D x 4.7" H
9V DC via battery or optional AC power supply
Switching power supply, ~8 Hours (9v alkaline)
.45 lbs (with 9v battery installed)