Table of Contents
Advertisement
Digital Wireless Systems
Digital UHF Wireless System
Model XDS95
Users Guide
Includes easy setup instructions for single and multi-
system operation
X2 Digital Wireless Systems
4630 Beloit Drive, Suite 20
Sacramento CA 95838 U.S.A.
Phone: (916) 779-1040
Fax: (916) 779-1041
Web Site
www.x2digitalwireless.com
Advertisement
Table of Contents
Summary of Contents for X2 Digital Wireless Systems XDS95
- Page 1 Digital Wireless Systems Digital UHF Wireless System Model XDS95 Users Guide Includes easy setup instructions for single and multi- system operation X2 Digital Wireless Systems 4630 Beloit Drive, Suite 20 Sacramento CA 95838 U.S.A. Phone: (916) 779-1040 Fax: (916) 779-1041 Web Site...
- Page 2 XDS95 Owners Manual Version 1.1 December 11, 2006 9:30 AM...
-
Page 3: Table Of Contents
Contents Chapter 1. Introduction to the XDS95 ........1 About the XDS95 ................. 1 System Components ................1 Chapter 2. XDS95 System Features .......... 2 XDR1 Digital UHF Receiver ..............2 XDT1 Digital UHF Transmitter ............. 2 Chapter 3. Operating Your XDS95 System ...... -
Page 4: Chapter 1. Introduction To The Xds95
• Five segment LED display (battery status, link status, audio level, RF level and channel) With the XDS95 Digital UHF Wireless System you'll have the freedom and sound to deliver your most expressive performance every time without any hassles or complicated setup procedures. -
Page 5: Xdr1 Digital Uhf Receiver
XDS95 Digital UHF System Features XDR1 Digital UHF Receiver LED Display AC Adapter Jack (Adapter is optional) • See system setup on page 3. • 9V 300mA 1/4” Mono/Stereo Output Mode/Channel Select Button • See system setup on page 3. -
Page 6: Power Up Procedure
Setting Up Your Receiver Power Up Procedure Press on/off button to turn unit on. LEDs will cycle blue-red- blue on power up sequence. Once unit is powered on the unit will display current channel number with a blue LED and bat- tery life with a red led. -
Page 7: Power Up Procedure
Setting Up Your Transmitter Power Up Procedure Press on/off button to turn unit on. LEDs will cycle blue-red- blue on power up sequence.Once unit is powered on the unit will display current channel number with a blue LED and bat- tery life with a red led by continuously toggling between the two LEDs. -
Page 8: Chapter 4. Additional Information
Additional Information Multi-system Operation Up to five systems can operate simultaneously. In situations where it is necessary to have more than one person wireless, each transmitter and receiver combination must be set to the same channel. Set the first system to transmit and receive on channel “one”, the second sys- tem to transmit and receive on channel “two”... -
Page 9: Troubleshooting
Refer All Servicing to X2 We believe that the XDS95 is one of the most reliable wireless systems that can be made using current technology, and should provide years of trouble-free use. However, should problems occur, DO NOT attempt to service the unit yourself. Service on this product should only be performed by X2. -
Page 10: Specifications
Specifications Overall System Specifications Transmission Format: X2 proprietary digital audio transmission Frequency Response: 20 Hz - 12 kHz Audio Dynamic Range: >117 dB Distortion: 0.03% THD RF Carrier Frequency: 902 MHz to 928 MHz, FSK Selectable Frequencies: Five RF Output Power: 10mw Audio Output Level: Unity gain with transmitter input... - Page 12 © 2006 X2 Digital Wireless Systems, Inc. All rights reserved. Q-Diversity™,FrequencyClear™ and DigiScan™ are trademarks of X2 Corporation. XDS95 PATENTS PENDING.