To Update The Basestation 1000 Firmware From The Baseline Web Site; Basestation 3200 Instructions; To Check The Version Of Firmware On Your Basestation 3200 Controller; To Update The Basestation 3200 Firmware From The Baseline Web Site - Base Line 3G Cell Modem Installation And User Manual

Installation and User Guide for Baseline Cell Modems in Pedestal Enclosures

To update the BaseStation 1000 firmware from the Baseline web site

You will need a computer with a USB port. This computer must have access to the Internet. You
also need a USB (thumb) drive. You download the firmware from the Baseline web site to the USB
drive. Then, you take the USB drive to the controller and install the update.
1. Go to the Baseline web site at the following URL:
www.baselinesystems.com
2. On the home page, click Support.
In the left navigation bar, click Firmware Version Updates.
3.
4. Click the BaseStation 1000 tab.
5. Follow the instructions on the web page to download the update. You can also click the
Printable Instructions link on the web page to display the instructions in a format that is
suitable for printing.

BaseStation 3200 Instructions

BaseStation 3200 controllers running firmware version 12.17 and higher have integrated support
for 3G cell modem communication. If your controller is running an earlier firmware version, you will
need to download a firmware update onto a USB drive from the Baseline web site.

To check the version of firmware on your BaseStation 3200 controller

On the BaseStation 3200, turn
the dial to the Advanced
position.
The version number of the
firmware displays at the bottom
of the screen.
If your controller is running
firmware version earlier than
12.17, you will need to
download a firmware update
onto a USB drive from the Baseline web site, and then install it on your controller.

To update the BaseStation 3200 firmware from the Baseline web site

You will need a computer with a USB port. This computer must have access to the Internet. You
also need a USB (thumb) drive. You download the firmware from the Baseline web site to the USB
drive. Then, you take the USB drive to the controller and install the update.
1. On a computer that is connected to the Internet, go to the Baseline web site at the following
URL:
www.baselinesystems.com
2. On the home page, click Support.
3. In the left navigation bar, click Firmware Version Updates.
Page 7