Reading The Camera Type; Reading The Firmware Revision; Resetting The Camera - Dalstar 1M60 User's Manual And Reference

1M60 Camera User's Manual

3.3 Reading the Camera Type

This read command returns an 8-bit value unique to the type of camera interrogated.
A 1M60 will return a value of 02h when this command is issued. This is useful for
applications that need to function with multiple DALSTAR camera types.
Example: Read the camera type
Binary
Hex

3.4 Reading the Firmware Revision

This command returns a byte in which the lower nibble is the revision number for the
clock board firmware and the upper nibble is undefined. The ability to read this
value may assist in customer support issues.
Example: Read the firmware version
Binary
Hex

3.5 Resetting the Camera

This is the only "write" command that is not followed by a data byte. This command
resets all clock board registers to their default values (the values used at power-up).
Table 13.
Feature
Frame Rate (fps)
Integration Time (ms)
Resolution (pixels)
Video Gain
Binning Mode
Pixel Offset
Triggering
Integration Control
Data Rate (MHz)
Example
Use this command to reset the camera:
Binary
Hex
DALSA
Command Value Returned (1M60)
1100 0011
C3h
Command
1100 0101
C5h
Default values in effect after reset
1M60 Default
60
15.8
1024 x 1024
1x
1x1
0
INTERNAL
INTERNAL
20
Command Value
1000 0000 -
80h -
0000 0010
02h
18
C32-10010-01