Wireless Lan Card - Toshiba Satellite M300 Maintenance Manual

Replacement Procedures
4.5

Wireless LAN card

Remove a Wireless LAN card
The following describes the procedure of removing a Wireless LAN card (See Figure 4-5).
1. Remove the following screw of wireless cover securing wireless LAN card cover and
remove it. And remove screw of wireless board
• 2.5.0 x 4.0B
2. Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN
card.
3. Open the left and right latches to remove a wireless LAN card from the connector on
the system board.
Wireless LAN antenna
cabl e
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
BIND screw
Figure 4-5 Remove a wireless LAN card
4-17
x3
Wireless LAN card
cover with 3 screws
CN30
Wireless LAN with 2
screws