Download Print this page

Advertisement

Quick Links

LIMITED LIFETIME WARRANTY
Franke Consumer Products, Inc., Kitchen Systems Division extends the following
warranty to the original purchaser of its faucets effective January 1, 2003.
All faucets installed in a private residence will carry a limited lifetime warranty on all
mechanical parts to be free of manufacturing defects in material and workmanship
under normal usage. All chrome finishes carry a limited lifetime warranty; all other
finishes are warranted for five (5) years form the original date of purchase.
This warranty applies only to the original owner, providing the product has been
installed in accordance with our installation instructions, used as recommended and in
a normal residential application. In the event of a warranty claim, the owner will be
required to provide proof of purchase - save sales receipt. This warranty covers all
components which make the product operational. Franke, at its option, may repair or
replace the product or components necessary to restore the product to good working
condition. Franke reserves the right to inspect the installation prior to the actual
replacement of the product or component part.
This warranty does not cover misuse or abuse, accidental damages, scuffs or scratches,
improper installation, abnormal usage, negligence or damage caused by improper
maintenance or cleaning. Normal wear of parts is excluded from the warranty. Damage
caused by impurities or acts beyond our control are not covered. Any product or part
which has been repaired or altered in any manner outside of Franke's factory, unless
previously authorized in writing by Franke, will void warranty. Any replacement
excludes transportation and any labor re-installation costs. This warranty does not
allow recovery of incidental or consequential damages such as loss of use, delay,
property damage or other consequential damage, and Franke accepts no liability for
such damages.
The Franke warranty is limited to the above conditions and to the warranty period
specified herein and is exclusive. Franke DISCLAIMS all other warranties, expressed
or implied, including IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR
FITNESS FOR AS PARTICULAR PURPOSE. This warranty gives you specific legal
rights that may vary from state to state.
Further information
For any further information about our products, about the installation of them or about
the guarantee, please dial the number of the customer service:
Phone number +1-215-822-6590
Franke Consumer Products Inc. - Kitchen Systems Division
Or: 1-800-626-5771
3050 Campus Drive, Suite Hatfield, PA 19440
Fax number + 1-215-822-5873
InstallationGuide(Print)-FF6000&FF7000_I
INSTRUCTION MANUAL
FF6000 . FF7000
8/8
KITCHEN
SYSTEMS

Advertisement

loading
Need help?

Need help?

Do you have a question about the FF6000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Franke FF6000

  • Page 1 Any product or part which has been repaired or altered in any manner outside of Franke's factory, unless previously authorized in writing by Franke, will void warranty. Any replacement excludes transportation and any labor re-installation costs.
  • Page 2: Technical Data

    10406 * Sidespray Base Shank www.frankeksd.com 10407 * Escutcheon Flange 3-058 Bridge Faucet Sealing Kit info.fks@franke.com *NOTE: Specify color finish when CONTENTS IN BOX ordering replacement parts Faucet Sidespray Assembly Diverter Connection Tee Valve & Diverter Mounting Nut...
  • Page 3 7. Unscrew plastic mounting nuts from the faucet shanks. 3-033 Tee Body & Diverter 8. Place the escutcheons (for FF6000) and large 'O'rings (for FF6000 and/or FF7000) 3-034 * Sidespray Head & Grip over the faucet shanks and place the faucet into the desired position.
  • Page 4 STANDARD MAINTENANCE AND 14. Connect and tighten shorter supply hoses onto diverter-tee. Use open end wrench. 15. Next, install the sidespray assembly by installing rubber gasket & escutcheon TROUBLE SHOOTING flange along with base shank into 1-3/8” mounting hole. 16. From underneath the sink, install plastic mounting nut onto base shank until fully CLEANING OF THE SPRAY HEAD tightened.

This manual is also suitable for:

Ff7000