GMC Acadia 2011 Owner's Manual page 238

7-44 Infotainment System
t
(Previous Track/Chapter):
Press to return to the start of the
current track or chapter. Press
again to go to the previous track
or chapter. This button might not
work when the DVD is playing
the copyright information or the
previews.
u
(Next Track/Chapter): Press
to go to the beginning of the next
chapter or track. This button might
not work when the DVD is playing
the copyright information or the
previews.
r
(Fast Reverse): Press to
quickly reverse the DVD or CD.
To stop fast reversing a DVD video,
s
press . To stop fast reversing
a DVD audio or CD, release
This button might not work when
the DVD is playing the copyright
information or the previews.
[
(Fast Forward): Press to fast
forward the DVD or CD. To stop fast
forwarding a DVD video, press
To stop fast forwarding a DVD audio
or CD, release
not work when the DVD is playing
the copyright information or the
previews.
e
(Audio): Press to change audio
tracks on DVDs that have this
feature when the DVD is playing.
The format and content of this
function vary for each disc.
{
(Subtitles): Press to turn
ON/OFF subtitles and to move
through subtitle options when a
DVD is playing. The format and
content of this function vary for
r
.
each disc.
AUX (Auxiliary): Press to switch
the system between the DVD player
and an auxiliary source.
s
.
[
. This button might
(Camera): Press to change
camera angles on DVDs that have
this feature when a DVD is playing.
The format and content of this
function vary for each disc.
1 through 0 (Numeric Keypad):
The numeric keypad provides the
capability of direct chapter or track
number selection.
(Clear): Press within
three seconds after entering a
numeric selection, to clear all
numerical inputs.
}
10 (Double Digit Entries): Press
to select chapter or track numbers
greater than nine. Press this button
before entering the number.
If the remote control becomes
lost or damaged, a new universal
remote control can be purchased.
If this happens, make sure the
universal remote control uses a
®
Toshiba code set.