GMC Acadia 2011 Owner's Manual page 217

Stopping and Resuming Playback
To stop playing a DVD without
turning off the system, do one
of the following:
c
Press on the remote control.
Press the softkey under the
stop or the play/pause icons
displayed on the radio.
If the radio head is sourced to
something other than DVD-V,
press the DVD/CD AUX button
to make DVD-V the active
source.
To resume DVD playback, do one of
the following:
j
Press / on the remote
control.
Press the softkey under the
play/pause icon displayed on
the radio.
The DVD should resume play from
where it last stopped if the disc
has not been ejected and the stop
button has not been pressed twice
on the remote control. If the disc
has been ejected or the stop button
has been pressed twice on the
remote control, the disc resumes
playing at the beginning of the disc.
Ejecting a Disc
Z
Press DVD on the radio to eject
the disc. If a disc is ejected from the
radio, but not removed, the radio
reloads the disc after a short period
of time. The disc is stored in the
radio. The radio does not resume
play of the disc automatically. If the
movie is reloaded and the RSA
system is sourced to the DVD,
the player begins to play again.
If loading and reading a DVD or
CD cannot be completed, and the
disc fails to eject, press and hold
Z
DVD for more than five seconds
to force the disc to eject.
Infotainment System
DVD Error Messages
Player Error: This message
displays when there are disc
load or eject problems.
Disc Format Error: This message
displays, if the disc is inserted with
the disc label wrong side up, or if
the disc is damaged.
Disc Region Error: This message
displays, if the disc is not from a
correct region.
No Disc Inserted: This message
displays, if no disc is present when
Z
DVD or DVD/CD AUX is
pressed on the radio.
7-23