Error Numbers Indication; Error Codes - Pioneer ES300 Service Manual

KEX-M8196ZT,M8196ZT-91,M8396ZT-02,M8396ZT-92

7.2. ERROR NUMBERS INDICATION

If the CD should fail to operate in CD multi player or if an error has taken place during the operation and resulted in
an error, the player will enter into the error mode. And the cause of such error is numerically indicated.
This is armed at assisting an analysis or repair.
Error mode ............................... Mode (A), Mode (B)
(1) Examples of Display
• Mode (A) ............................... ERR-X
• Mode (B) ............................... ERR-XX

(2) Error Codes

*1 *2 Classification
1 10 ELECTRIC
11 ELECTRIC
12 ELECTRIC
14 ELECTRIC
17 ELECTRIC
30 ELECTRIC
4 A0 SYSTEM
50 MECHANISM
3 60 MECHANISM
70 MECHANISM
2 80 MECHANISM
• *1 ........................................... Mode (A) error code
• *2 ........................................... Mode (B) error code
Nomal play
Mode(A):
Displays an error code
Mode(B):
Displays an error code
Mode(B):To cancel the error code, set ACC to OFF
Returns to normal
mode with ACC ON.
62
Description
Carriage home failure
Focus failure
SETUP failure
Subcode failure
Mirror failure
Set up failure
Search time out
Power failure
An error upon ejection
An error while putting in
and out the tray
An error upon elevation
An error with an empty
magazine inserted
To obtain more information:
While error code is displayed:
Error
1.Press the CD key three times, while holding down the (1) and
(6) keys simultaneously.
(The system enters Diagnosis mode.)
2.Then,press the TRK DOWN and 4keys simultaneously.
The error status of the product is maintained.
The system performs retry operation for the error.
Cause/Detail
Carriage doesn't move to or from the innermost position
tHome switch failed and/or carriage immobile
Focus failed
tDefects, disc upside-down, severe vibration
Spindle failed to lock or subcode unreadable
tSpindle defective, defect, severe vibration
Unrecorded CD-R
The disc is upside-down, defects, vibration
AGC protect failed
tDefects, disc upside-down, severe vibration
Failed to reach target address
tCarriage/tracking defective and/or defects
Power overvoltage or short circuit detected
tSwitching transistor defective and/or power abnormal
MAG switch release time has time out
Elevation time out when eject
Tray in / out time has time out
Tray is caught when put in
Elevation time has time out
No disc is available